Workholding Technology - Support elements Mini support element, screw-in

Hydrokomp

Brand

Hydrokomp

Category

Workholding Technology

Sub Categoey

Support elements

Download

When it comes to avoiding vibrations and deflection when machining workpieces, these support elements are the ideal support. Mini support elements are suitable for clamping fixtures where a large number of support points are required in a confined space.

When it comes to avoiding vibrations and deflection when machining workpieces, these support elements are the ideal support. Mini support elements are suitable for clamping fixtures where a large number of support points are required in a confined space. Another area of application is the machining of small workpieces. The very compact screw-in housing allows horizontal and vertical mounting in the clamping fixture. This means that space-saving arrangements can be realized even in confined installation conditions. The pressure oil is supplied via a drilled channel in the mounting hole. The support plunger is applied to the workpiece with a hydraulically pre-tensioned spring. The basic position of the bolt is retracted. The hydraulic clamping can be combined with the hydraulic clamping of the workpiece or carried out separately.

Special features:

  • Ideal for small workpieces
  • Ideal for thin-walled workpieces
  • Arrangement with a high number of
    support points possible
  • Space-saving horizontal/vertical installation possible
  • Clamping possible separately or combined with clamping process
  • Pressurized oil supply via drilled channels
  • Sealing air, ventilation
Operating pressure:pmax. 200 bar
Mode of operation:Application by hydraulics
Support bolt:Ø 7 mm, stroke 4 mm
Load:Maximum 1000 N
at 200 bar
Spring force min:5 N
Spring force max:10 N
Oil connection:

drilled channels

Wiper:

Soft wiper

image_not_found

Workholding Technology

Rotary linear clamp Hydraulic

Hydraulic double-acting, pmax. 250 bar, pneum. query clamped and/or unclamped (also simultaneously!) During the clamping process, the rotary linear clamp first rotates the clamping arm and then switches to a linear movement. This means there are no lateral forces at the clamping point and workpiece tolerances are compensated for by the linear stroke.

LEARN MORE
image_not_found

Workholding Technology

Support elements, screw-in

Support elements, screw-in Contact by spring, actuation with hydraulics, pmax. 500 bar

LEARN MORE