Workholding Technology - Lever Clamp Lever clamps

Hydrokomp

Brand

Hydrokomp

Category

Workholding Technology

Sub Categoey

Lever Clamp

Download

Lever clamping cylinders are primarily intended for applications in which the clamping point must be free for handling the workpiece after unclamping.

The advantage over swing clamp cylinders is the more compact design and higher clamping force. The lever clamping cylinder is particularly suitable for applications with interfering contours that do not allow the use of swing clamp cylinders.
The high force density is transferred to the clamping lever via a pressure piston. The movable bearing of the clamping lever leaves the clamping point completely free during unclamping. In addition to the standard clamping lever, special clamping levers can also be fitted.

Operating conditions:
Hydraulic lever clamping cylinders are double-acting. This ensures clear closing and opening times. Either G1/8 or G1/4 threaded connections or O-ring flange connections can be used for the pressure oil supply. The clamping lever develops the optimum clamping force in the horizontal position. Workpiece tolerances up to a positional deviation of approx. +/- 8.5° are easily compensated.

Position control (optional):
The lever clamping cylinder can be equipped with a continuous piston rod. The monitoring can be carried out via inductive proximity switches or pneumatically.

Special features:

  • Protective metal scraper
  • Partially retractable housing
  • Oil supply via holes or threaded connections
  • Wide range of installation options
  • Easy loading and unloading of the
    device
  • Clamping lever can be optimized for the workpiece
  • Inductive or pneumatic position control available
Operating pressure:pmax. 350 bar (200 bar for piston Ø 40 mm)
Operating principle:double-acting
Wiper:Soft wiper and metal wiper
Piston Ø:

16, 25, and 40 mm

Clamping force:From 1.5 kN at 100 bar to 19 kN at pmax.
Seal type:FKM from -10°C to 150°C
Oil connection:Thread G1/8 or G1/4 or O-ring flange or drilled channels
image_not_found

Workholding Technology

Rotary linear clamp Hydraulic

Hydraulic double-acting, pmax. 250 bar, pneum. query clamped and/or unclamped (also simultaneously!) During the clamping process, the rotary linear clamp first rotates the clamping arm and then switches to a linear movement. This means there are no lateral forces at the clamping point and workpiece tolerances are compensated for by the linear stroke.

LEARN MORE
image_not_found

Workholding Technology

Support elements, screw-in

Support elements, screw-in Contact by spring, actuation with hydraulics, pmax. 500 bar

LEARN MORE