Universal Cylinder Double-acting

Universal Cylinder Double-acting

Info:

Due to its design, this cylinder can be used as a lifting or clamping cylinder. The universal cylinder is equipped with a sturdy retaining ring. This allows it to be installed directly into a through-hole in the fixture body. The installation depth can be adjusted in two stages. The double-acting cylinder is equipped with threaded connections for the pressure oil supply. The connection can be axial or radial. Depending on the type of connection, the screw plugs must be replaced. To prevent chips and liquids from entering, the piston slides through a soft wiper made of PU. Pressure screws, for example, can be fitted in the internal thread of the piston. The universal cylinder is suitable for the temperature range from -40°C to +80°C.

Special features:

  • Ideal for changing workpiece sizes
  • Any installation position possible
  • Adjustable installation depth
  • Easy to replace
  • Axial and radial threaded connections
  • Standard cylinders and special variants available

Operating pressure:pmax. 500 bar
Mode of operation:double-acting
Piston Ø:25, 32, 40, 50, 63 mm
Stroke:32, 40, 50 and 64 mm
Thrust:from 4.9 kN at 100 bar to 124.4 kN at 500 bar
Pulling force:from 3.3 kN at 100 bar to 84 kN at 500 bar
Oil connection:Thread G1/4 or G3/8
Seal type:NBR -10°C to +80°C
WiperSoft wiper